|
|
Soft circuits |
Soft circuits can be developed using polyester or polyimide as
the base material, depending on your interface requirements. From
simple single layer copper flex on polyester to complex double-sided
on polyimide, Bolin Input Components rapidly provides customers
with application-specific solutions.
|
• Trace Width
Standard line width.............................0.25mm, minimum 0.10mm
Standard trace pitch............................0.50mm, minimum 0.20mm
Minimum space between circuits...........0.10mm |
• Plating
• Component Assembly
Connector crimping
Soldering of components |
• B ase Material
Polyimide: standard thickness..............................1mil
2mil and 1/2 mil available
Polyester: standard thickness...............................3mil
1mil, 2mil and 5mil available
Conductor: laminated ED copper or RA copper.......standard thickness 1 oz
(1.4mil/0.035mm)
1/2 oz and 2 oz available
Coverlay: polyimide, polyester or solder mask thickness.......1/2 mil, 1mil, 2mil, 3mil or 5mi |
|
| |
|
